Vials are available in all capacities, materials like plastic vials or glass vials, and in a variety of colors to meet any collection, storage, or analysis need. Tailor vessels for specific media with various translucent manufacturing and different sterility options for precise test results.
Autosampler Vials, Caps, and Closures Thermo Scientific™ 9mm Clear Glass Screw Thread Vials Nearly eliminate septa push-through and improve sealing with vials built with the innovative Advanced Vial Closure System (AVCS).
Antibodies & Protein Biology Antibody Production & Purification; Electrophoresis, Western Blotting and ELISA
Fisher Scientific - Lagoas Park, Edificio 11 - Piso 0 - Porto Salvo Tel. +351 21 425 33 50 - Fax. +351 21 425 33 51 - pt.fisher@thermofisher.com
Autosampler Vials, Caps, and Closures Thermo Scientific™ 20 mm Headspace Glass Vials Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish.
.jpg)
No risk for exctractables, no risk of losing valued sample by taking the wrong vial and closures, which might not be compatible with the sample or solvent. Each lot of certified kits is tested by HPLC/UV and GC/MS against 15 critical parameters.
If only a limited volume of sample is available, you will have to choose between using an insert for your regular autosampler vial, a microvial or a high recovery vial. Note: Most 12x32 mm autosampler vials hold between 1.5mL to 2.0mL of liquid, depending on where the manufacture measures the vial full.
Polypropylene certified vials for autosampler use are translucent and chemically resistant. They are the vials of choice for pH-sensitive samples, sodium, or heavy metal analyses. Polypropylene vials come in snap, crimp, or screw styles and can contain sample volumes up to 700 µL while leaving minimum residual volumes of less than 3 µL.
Micro sampling vials and closures for smaller sample sizes up to 2mL Most sample vials are flat-bottomed with straight sides for stability on the bench, although dedicated vial racks can be used. Sample vials are often profiled to minimise dead volumes above the sample surface.
Fisher Scientific - Lagoas Park, Edificio 11 - Piso 0 - Porto Salvo Tel. +351 21 425 33 50 - Fax. +351 21 425 33 51 - pt.fisher@thermofisher.com
Vials are tested for high recovery of analytes at 1 ng/mL concentration, using UPLC®/MS/MS (MRM). TruView Vials exhibit the lowest surface adsorption of any LC autosampler vial on the market. 96-Well Plate, 700 µL per well is made from a clean grade of polypropylene. The wells are designed to maximize sample recovery for all ACQUITY UPLC
2ml screw chromatography vials are primarily utilized to inject samples from an autosampler. They are sold in several sizes, although 2 mL vials are more generally used. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials.
3. 2ml Clear autosampler vial,12mm Diameter, 32mm Height, 9-425 9mm screw top, and included blue ABS Screw Cap & Septa (White PTFE/Red Silicone Liner) 4. Standard Autosampler Sample Vial with Writing area for HPLC & GC Chromatography, vials can be used for high performance liquid chromatography and gas chromatography for reliable analysis results
2ml sample vial are made of high quality borosilicic acid glass,low content of free ions,low coefficient of expansion and very high chemical resistance.It is suitable for containing all injectable preparations with acid, neutral and alkaline pH.Temprature range from -76F to 248F.
If only a limited volume of sample is available, you will have to choose between using an insert for your regular autosampler vial, a microvial or a high recovery vial. Note: Most 12x32 mm autosampler vials hold between 1.5mL to 2.0mL of liquid, depending on where the manufacture measures the vial full.