Lab 2ml Hplc Vial With Caps Liner White Ptfe/red Silicone Pre-slit Septa , Find Complete Details about Lab 2ml Hplc Vial With Caps Liner White Ptfe/red Silicone Pre-slit Septa,2ml Vial,Hplc Vial,Septa from Laboratory Bottle Supplier or Manufacturer-Jiangyin Allpro Polymer Technology Co., Ltd.
2ml autosampler vials 9mm for HPLC system with bonded septa caps. Including: 100pcs Clear/amber bottles 32x11.6mm made of borosilicate glass, 2ml lab vials 9-425 screw thread, Flat base Sample Vials; Made out of USP TYPE I Glass. With writing patch for pencil mark.
Wheaton Sample Vials, 4mL or 0.14oz, Amber, 13-425 Finish with 14B Rubber Liner, Type I Borosilicate Glass (4 mL E-C Vial, Glass Amber, 13-425 Rubber Lined Cap)4 mL Economy Vial, Glass Amber, 13-425 Cap, Rubber. These economically priced sample vials are conveniently packed in two shrink-wrapped
Search results for vial rack at Sigma-Aldrich. ADVANCED SEARCH; amber glass vial, O.D. × H 14.75 mm × 45 mm, thread for 13-425, pkg of 100 ea ... capacity 5.0 ...
Wide-opening 2 ml, 12 x 32 mm vial Superior 33 expansion borosilicate glass Meets extremely tight tolerances I-D vial with write-on patch measures 0.5, 1.0 and 1.5 ml 1230W33 Convenience Kit contains 100 Target Snap-It Clear Vials with Clear Seals with Red PTFE/White Silicone Septa.
Vials are assembled with open-top screw caps and PTFE faced silicone septa. They are available in both clear and amber glass and sizes from 2 mL to 40 mL. Clear vials are made of Wheaton-33 low extractable borosilicate glass. Amber vials are Wheaton-320 borosilicate glass. All vials are supplied in a shrink wrapped module to prevent contamination.
Description: Vial, sample, Borosilicate glass, Amber, with open top white PP PTFE faced silicone lined cap, 20,00 ml, Ø×H: 28×60 mm, Cap size: 24-400 ,WHEAW224612EA,WHEAW224610EA,WHEAW224609EA Product(s) marked with this symbol are discontinued - sold till end of stock.
Interlock limited volume vials offer the performance and convenience of a one-piece microvial for a fraction of the cost. A 300 µL insert is fused into a 12 x 32 mm clear or amber glass vial. This one-piece design reduces the potential for contamination.
Amber 2ml Hplc Vial With Screw Cap With Liner Ptfe/red Silicone Septa , Find Complete Details about Amber 2ml Hplc Vial With Screw Cap With Liner Ptfe/red Silicone Septa,2ml Vial,Hplc Vial,Ptfe Septa from Laboratory Bottle Supplier or Manufacturer-Jiangyin Allpro Polymer Technology Co., Ltd.
Description: Vials are manufactured from Type I, Class A (USP Type I) heavy-wall borosilicate glass and are designed to withstand pressures up to 300psi (20bar). Certificates ,89079-402CS,89079-406CS,89079-404CS
Use clean bottles only. † Use borosilicate glass bottle only. † Rinse bottle with desired solvent before refilling it. † Bottles can get contaminated with detergents form the dishwasher. † Exchange water-based solvents daily. † Algae growth may block the degasser or filters. † Precipitation of insoluble salts may block filters or
5ml High Quality Lab Test Glass Vial Borosilicate Empty Cork Glass Bottles Small Decorative Glass Sample Vials Inquiry Basket 1.4ml 1.5ml 2.2ml 2.7 Ml 4.5ml 6ml High Quality Clear Lip Gloss Packaging Tubes with Brush&Cap, Plastic Lipstick Containers
Aijiren Tech offers a wide range of 2ml HPLC Vials with a variety of closing technologies including screws, crimps and snaps.If you have any requirement for 2ml HPLC Vials.We have focusing on chromatography consumables producing over 15+ years.
Standard opening screw thread vials - 12 x 32 Type I borosilicate glass Clear or amber With or without marking areas Narrow opening allows use of 8-425 mm closures and septa. Designed to work in a variety of autosamplers.
100pcs 2ml 9-425 Screw Top Autosample Glass Vials With Blue Caps Septa HPLC GC C $33.42 Vial Inserts Microliter Optional For HPLC Analytical 8-425/9-425 Screw Top,100pk