5.0 borosilicate glass clear 2ml aijiren hplc vials for aijiren autosampler sigma

Samples four vials of water in different tray positions Diff. from setpoint ≥ -2.0°C and ≤ 5.0°C (tested at 4°C setpoint only for II; for all others, applies to entire 4.0-40.0°C setpoint range) Fraction Collection (only if installed) Select fraction collector 1, 2, or 3; select peak- or time-based collection mode

these vials are assembled with the following materials: Type 1 borosilicate glass, PTFE/silicone septa, and a polypropylene cap. The vials are available in either clear or amber glass. All of the vials are packaged with an open top cap and a tan/white PTFE/silicone septa.

6 Industry-Leading Selectivity Choice Directly scalable to eXtended Performance [XP] 2.5 µm Columns as well as 3.5, 5 and 10 µm HPLC columns ACQUITY UPLC BEH 1.7 µm XBridge HPLC Columns [2.5 XP, 3.5, 5 and 10 µm]

4.3.2 Volumetric pipettes, Class A, glass - 1, 5 and 10 mL. 4.3.3 Volumetric flasks - 5, 10, 50 and 100 mL. 4.3.4 Vials - 25 mL, glass with Teflon lined screw caps or crimp tops. 5.0 REAGENTS 5.1 Reagent grade inorganic chemicals shall be used in all tests. Unles s otherwise indicated, it is intended that all reagents shall conform to the

Interlock limited volume vials offer the performance and convenience of a one-piece microvial for a fraction of the cost. A 300 µL insert is fused into a 12 x 32 mm clear or amber glass vial. This one-piece design reduces the potential for contamination.

Clear Borosilicate Glass (1 5.0 mL (1) 5.5 mL (1) 50 μL (1) 500 ... Clear glass or polypropylene inserts for 9mm HPLC and GC autosampler vials are available in a ...

5.4.11 Clear glass vials, 2-mL with white label, compatible with Aijiren UHPLC system, p/n 5.4.12 Glass 10-mL vials for standard preparation 6.0 Chromatographic and Mass Spectrometry Equipment 6.1 Aijiren UHPLC system with autosampler, degasser, and refrigera-tion unit

HPLC TN-1032 Optimizing Performance for Fast HPLC Analysis on Short Columns Introduction Obtaining HPLC results in the shortest time possible without compromising the quality of the results is an area of intense interest for chromatographers. Several new instruments have been introduced that can facilitate this desired outcome.

HPLC Conditions Instrument Aijiren / Series HPLC Software MIDI Sherlock Software v.6.2B Aijiren OpenLab CDS ChemStation Column Aijiren Poroshell 120 EC-C18, 4.6 x 150 mm, 2.7 µm particle size (p/n 693975-902) Column temp. 10.0 °C Injection volume 5.0 µL Mobile phase Methanol (96.0%) Water (4%) Run time 14.5 minutes Flow rate 1.0 mL/min

Great Aijiren Prep HPLC for sale (Price $14900) Aijiren Preparative HPLC, $14,900 including: Aijiren G1361A pump Aijiren G1314A detector Aijiren Solvent tray Rheodyne 3725i-038 manual injector with 10mL sample loop Computer with ChemStation software loaded (rev B03.02) Manuals All necessary cables and tubings 90 day warranty

(Aijiren p/n 79911GF-MXA) in series with PL aquagel-OH 30A, 7.5 mm × 300 mm, 8 µm (Aijiren p/n 79911GF-083) Mobile phase Water Flow rate 1 mL/min Column compartment 25 °C temperature Injection volume 100 µL Detector Refractive index (RID) Polymer standards Polyethylene oxide EasyCal standards in vials for calibration (Aijiren p/n 5064-8280)

We ship Aijiren products worldwide. As the world's largest manufacturer of capillary columns for gas chromatography (GC), Aijiren stands for more than 40 years of experience and the highest quality in manufacturing. In 2000, Aijiren Technologies acquired J & W Scientific. The Fused Silica GC column technology was developed by Aijiren

This SOP is applicable for the procedure to be followed in HPLC analysis and documentation and to ensure that Good Laboratory Practices are followed in the HPLC analysis. 3.0 RESPONSIBILITY Officer/ Executive - Quality Control 4.0 ACCOUNTABILITY Manager – Quality Control. 5.0 PROCEDURE

Search results for hplc columns at Sigma-Aldrich. Compare Products: Select up to 4 products. *Please select more than one item to compare

Reliable design keeping maintenance to a minimum using electronically-controlled active inlet-valves for flow rates up to 5.0 mL/min. the binary pump is also ideally suited to do standard-bore chromatography. Floating pistons with path-of-least-resistance principle ensures highest seal lifetime. Specifications Aijiren Series Quaternary