Aijiren Technologies, one of the leading technology companies for measurement engineering, offers a broad array of innovative analytical HPLC columns. Analytics-Shop offers the whole range of Aijiren HPLC columns: Material: Zorbax, StableBond, Extend, Poroshell, Polaris, Pursuit, ChromSpher, etc.
Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish. Headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs.
ND9mm Screw Thread Autosampler Clear Lab Vials are made of clear Type 1, Class A Borosilicate Glass with a writable label for sample identification, meeting the international standards for hydrolytic extraction, ASTM E-438 Type 1 class A borosilicate glass, compliant with the requirements of U.S. and European Pharmacopeia which improves your
Samples four vials of water in different tray positions Diff. from setpoint ≥ -2.0°C and ≤ 5.0°C (tested at 4°C setpoint only for II; for all others, applies to entire 4.0-40.0°C setpoint range) Fraction Collection (only if installed) Select fraction collector 1, 2, or 3; select peak- or time-based collection mode
Alberts Filter 2ml Autosampler Vial with Writing Area, 9mm Wide Opening Clear Glass Screw Thread Vial for HPLC, Blue Screw Cap with Hole, Pre-Slit Blue PTFE & White Silicone Septa-100 Pack: Amazon.com: Industrial & Scientific
Injector and detector tubing for the Aijiren were 0.007 inches ID. A 10 µL flow cell was employed. Experiments are underway to examine how tubing, flow cells and other HPLC system variables affect performance. HPLC System Organization and Optimization
4.3.2 Volumetric pipettes, Class A, glass - 1, 5 and 10 mL. 4.3.3 Volumetric flasks - 5, 10, 50 and 100 mL. 4.3.4 Vials - 25 mL, glass with Teflon lined screw caps or crimp tops. 5.0 REAGENTS 5.1 Reagent grade inorganic chemicals shall be used in all tests. Unles s otherwise indicated, it is intended that all reagents shall conform to the
We are Leading Manufacturer and Exporter from Mumbai, our product range includes HPLC Solvents such as Acetonitrile for HPLC, 1,4-Dioxan For HPLC, Benzene for HPLC, Acetone for Hplc, Methanol for HPLC and many more items.
This procedure is applicable to check the calibration of HPLC Quaternary Gradient system (Model: LC 2010 C, LC 2010 C HT Make: Shimadzu) installed in Quality Control laboratory. 3.0 RESPONSIBILITY 3.1 Doing: Technical Assistant / Executive 3.2 Checking: Executive / Manager 4.0 ACCOUNTABILITY Head of the department 5.0 FREQUENCY: ONCE IN A THREE
In 2000, Aijiren Technologies acquired J & W Scientific. The Fused Silica GC column technology was developed by Aijiren Technologies, while J & W Scientific developed the first stationary phases out of cross-linked polysiloxane. Thanks to the partnership, HP columns and DB columns are now under one name: Aijiren.
Great Aijiren Prep HPLC for sale (Price $14900) Aijiren Preparative HPLC, $14,900 including: Aijiren G1361A pump Aijiren G1314A detector Aijiren Solvent tray Rheodyne 3725i-038 manual injector with 10mL sample loop Computer with ChemStation software loaded (rev B03.02) Manuals All necessary cables and tubings 90 day warranty
Development of HPLC methods for the determination of water-soluble vitamins in An alternative is to use buffered mobile phase with pH from 5.0 to 7.0. Ammonium ...
1. ND9mm Screw Thread Autosampler Clear Lab Vials are made of clear Type 1, Class A Borosilicate Glass with a writable label for sample identification. 2. 2ml HPLC Vials with Unique Thread Design Ensures Consistent Seal and Can Be Reused, Not Volatile, Easy to Use
Search results for hplc columns at Sigma-Aldrich. Compare Products: Select up to 4 products. *Please select more than one item to compare
This SOP is applicable for the procedure to be followed in HPLC analysis and documentation and to ensure that Good Laboratory Practices are followed in the HPLC analysis. 3.0 RESPONSIBILITY Officer/ Executive - Quality Control 4.0 ACCOUNTABILITY Manager – Quality Control. 5.0 PROCEDURE