| V913 | 1.5mL Clear Screw Neck Vial, 9mm Thread,5.0 type | SC9191 | White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V923 | 1.5mL Clear Screw Neck Vial w/Write-on Spot, 9mm Thread,5.0 type | SC91191 | Pre-slit White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V935 | 1.5mL Amber Screw Neck Vial, 9mm Thread,5.0 type | SC9291 | Red PTFE/White Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V945 | 1.5mL Amber Screw Neck Vial w/Write-on Spot. 9mm Thread,5.0 type | SC92291 | Pre-slit Red PTFE/White Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| VR913 | 1.5mL Clear 9mm Screw Vial, High Recovery with 30UL Reservoir,11.6*32mm, 5.0 type | SC9391 | Red PTFE/White Silicone/Red PTFE Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| VR935 | 1.5mL Amber 9mm Screw Vial, High Recovery with 30UL Reservoir,11.6'32mm, 5.0 type | SC9192 | White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, Colsed-top |
| VP923 | 1.5mL Clear PP 9mm Screw Vial, 11 .6*32mm | SC9194 | White PTFE/Red Silicone Septa, 9mm Black Short Screw PP Cap, Colsed-top |
| VP945 | 1.5mL Amber PP 9mm Screw Vial, 11.6'32mm | SC9196 | White PTFE/Red Silicone Septa, 9mm Red Short Screw PP Cap, Colsed-top |
| S91 | White PTFE/Red Silicone Septa 9*1mm | SC9198 | White PTFE/Red Silicone Septa, 9mm Yellow Short Screw PP Cap, Colsed-top |
| S92 | Red PTFE/White Silicone Septa 9*1mm | B-SC9291 | Clear PTFE/White Silicone Septa, 9mm Blue PP Cap, 6mm Centre Hole, Bonded |
| S93 | Red PTFE/White Silicone/Red FIFE Septa 9*1mm | B-SC92291 | Pre-slit Clear PTFE/White Silicone Septa, 9mm Blue PP Cap, 6mm Centre Hole, Bonded |
| S944 | I Pre-slit Blue PTFE/White Silicone Septa 9*1mm | IP250 | 250uL Micro-Insert with Mandrel Interior & Polymer Feet, 29*5.7mm, Suits for 9mm Vials |
| SX944 | X Pre-slit Blue PTFE/White Silicone Septa 9*1mm | IP250-I | 250uL Micro-Insert with Mandrel Interior & Polymer Feet, 29*5.7mm, Suits for 9mm Vials, Economy Package |
| C91 | 9mm Black Screw PP Cap, 5.5mm Centre Hole | IV250 | 250u1 Insert , Conical Bottom, 31*5.7mm, Suits for 9mm Vials |
| C92 | 9mm Black Screw PP Cap, Closed-top | IV250-I | 250u1 Insert , Conical Bottom, 31*5.7mm, Suits for 9mm Vials, Economy Package |
| C93 | 9mm White Screw PP Cap, 5.5mm Centre Hole | I300 | 300uL Micro-Insert, 31*5.6mm, Clear, Flat Bottom, Suits for 9mm Vials |
| C95 | 9mm Red Short Screw PP cap, 6mm Centre Hole | C97 | 9mm Yellow Short Screw PP cap, 6mm Centre Hole |
However, substandard vials, caps, and septa can lead to sample loss, contamination, and damaged autosampler needles. Aijiren understands that vials are a
Feb 13, 2003 Overview of the Quaternary Pump. Pump drive. Pump head. Outlet valve. Purge valve. Passive inlet valve. MCGV. Fan. Damper. Power supply.
Install the Optional Sample Cooler/Sample Thermostat 116 The Vialsampler can accommodate two vial drawers, providing space for up to. 132 samples.
Aijiren Certified Vials, and NEW Aijiren CrossLab Vials for non-Aijiren Aijiren CrossLab HPLC supports instruments from Waters, Shimadzu, Dionex.
The sampling interval of the diode array is < 1 nm over the wavelength range Aijiren recommends that you install the HPLC instrument in the Lab ...
Feb 13, 2003 solvent selection and automation in HPLC method development, ... sample-rack holding 100 × 1.8 mL vials is available for use with ...
Toxic, flammable and hazardous solvents, samples and reagents the material handling and safety data sheet supplied by the vendor, and follow good.
samples in containers such as vials, tubes, or well plates, draw a specified sample volume, and inject it into the reversed-phase HPLC system. The collector.
Sample Trays for HPLC. Aijiren autosampler vial trays and drawers are designed to ensure that your autosampler setup is perfectly equipped to deal with a
Aijiren II Sample cooler. $ 4,977.00 240Z AA Spectrometer with UltrAA Supply ... . II Quaternary Pump VL. $ 13,631.00.
Maximum capacity of 132 sample vials within the same foot print Aijiren recommends that you install the HPLC instrument in the Lab Flex.
Most users will be familiar with the main 2 mL vial being the HPLC vial or LC/MS Gain Confidence in Sample Containment using Aijiren Autosampler Vials.
PM kit for isocratic / quaternary pumps ( / and B) kit. G1310-68741 Drawer for 66 x 2 mL vials ... Sample loop 100 µL (color code: white).
Items 1 - 8 Aijiren II Quaternary Pump VL ( ), ... Easy, fast and secure transfer of methods from HPLC to sub-2-micron columns.
The II LC System is a robust HPLC instrument that offers the widest run samples alternately through one or the other injection path.