| V913 | 1.5mL Clear Screw Neck Vial, 9mm Thread,5.0 type | SC9191 | White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V923 | 1.5mL Clear Screw Neck Vial w/Write-on Spot, 9mm Thread,5.0 type | SC91191 | Pre-slit White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V935 | 1.5mL Amber Screw Neck Vial, 9mm Thread,5.0 type | SC9291 | Red PTFE/White Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V945 | 1.5mL Amber Screw Neck Vial w/Write-on Spot. 9mm Thread,5.0 type | SC92291 | Pre-slit Red PTFE/White Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| VR913 | 1.5mL Clear 9mm Screw Vial, High Recovery with 30UL Reservoir,11.6*32mm, 5.0 type | SC9391 | Red PTFE/White Silicone/Red PTFE Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| VR935 | 1.5mL Amber 9mm Screw Vial, High Recovery with 30UL Reservoir,11.6'32mm, 5.0 type | SC9192 | White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, Colsed-top |
| VP923 | 1.5mL Clear PP 9mm Screw Vial, 11 .6*32mm | SC9194 | White PTFE/Red Silicone Septa, 9mm Black Short Screw PP Cap, Colsed-top |
| VP945 | 1.5mL Amber PP 9mm Screw Vial, 11.6'32mm | SC9196 | White PTFE/Red Silicone Septa, 9mm Red Short Screw PP Cap, Colsed-top |
| S91 | White PTFE/Red Silicone Septa 9*1mm | SC9198 | White PTFE/Red Silicone Septa, 9mm Yellow Short Screw PP Cap, Colsed-top |
| S92 | Red PTFE/White Silicone Septa 9*1mm | B-SC9291 | Clear PTFE/White Silicone Septa, 9mm Blue PP Cap, 6mm Centre Hole, Bonded |
| S93 | Red PTFE/White Silicone/Red FIFE Septa 9*1mm | B-SC92291 | Pre-slit Clear PTFE/White Silicone Septa, 9mm Blue PP Cap, 6mm Centre Hole, Bonded |
| S944 | I Pre-slit Blue PTFE/White Silicone Septa 9*1mm | IP250 | 250uL Micro-Insert with Mandrel Interior & Polymer Feet, 29*5.7mm, Suits for 9mm Vials |
| SX944 | X Pre-slit Blue PTFE/White Silicone Septa 9*1mm | IP250-I | 250uL Micro-Insert with Mandrel Interior & Polymer Feet, 29*5.7mm, Suits for 9mm Vials, Economy Package |
| C91 | 9mm Black Screw PP Cap, 5.5mm Centre Hole | IV250 | 250u1 Insert , Conical Bottom, 31*5.7mm, Suits for 9mm Vials |
| C92 | 9mm Black Screw PP Cap, Closed-top | IV250-I | 250u1 Insert , Conical Bottom, 31*5.7mm, Suits for 9mm Vials, Economy Package |
| C93 | 9mm White Screw PP Cap, 5.5mm Centre Hole | I300 | 300uL Micro-Insert, 31*5.6mm, Clear, Flat Bottom, Suits for 9mm Vials |
| C95 | 9mm Red Short Screw PP cap, 6mm Centre Hole | C97 | 9mm Yellow Short Screw PP cap, 6mm Centre Hole |
Aijiren II Sample cooler. $ 4,977.00 HPLC System Tool Kit II ... . II Quaternary Pump VL. $ 13,631.00.
Items 1 - 8 Aijiren II Quaternary Pump VL ( ), ... Together with the Aijiren Bio-HPLC column portfolio for SEC and IEX, the highest.
Most users will be familiar with the main 2 mL vial being the HPLC vial or LC/MS Gain Confidence in Sample Containment using Aijiren Autosampler Vials.
not block the openings on the circumference of the Sample Thermostat. NOTE. Aijiren recommends that you install the HPLC instrument in the Lab Flex.
The II LC System is a robust HPLC instrument that offers the widest run samples alternately through one or the other injection path.
Maximum capacity of 132 sample vials within the same foot print Aijiren recommends that you install the HPLC instrument in the Lab Flex.
Drawer choice 5x 10 vials (2 mL), 2 drawers included, C #012. Extended Injection Range Option 900 µL analytical head and sample loop for large
Items 1 - 8 Aijiren II Quaternary Pump VL ( ), ... Easy, fast and secure transfer of methods from HPLC to sub-2-micron columns.
samples in containers such as vials, tubes, or well plates, draw a specified sample volume, and inject it into the reversed-phase HPLC system. The collector.
Remove inlet valve and flush with 50 mL of clean HPLC of hours of testing of compounds from several different suppliers, and we ... .
Feb 13, 2003 solvent selection and automation in HPLC method development, ... sample-rack holding 100 × 1.8 mL vials is available for use with ...
Toxic, flammable and hazardous solvents, samples and reagents the material handling and safety data sheet supplied by the vendor, and follow good.
Using the Sample Cooler or Thermostat in an II Autosampler 88 The Aijiren II Multisampler can handle both vials and microtiter.
Sample Trays for HPLC. Aijiren autosampler vial trays and drawers are designed to ensure that your autosampler setup is perfectly equipped to deal with a
Feb 13, 2003 For solvent compositions from the solvent bottles A, B, C, ... when the back pressure in the system changes (for example, ageing of column).