| V913 | 1.5mL Clear Screw Neck Vial, 9mm Thread,5.0 type | SC9191 | White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V923 | 1.5mL Clear Screw Neck Vial w/Write-on Spot, 9mm Thread,5.0 type | SC91191 | Pre-slit White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V935 | 1.5mL Amber Screw Neck Vial, 9mm Thread,5.0 type | SC9291 | Red PTFE/White Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V945 | 1.5mL Amber Screw Neck Vial w/Write-on Spot. 9mm Thread,5.0 type | SC92291 | Pre-slit Red PTFE/White Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| VR913 | 1.5mL Clear 9mm Screw Vial, High Recovery with 30UL Reservoir,11.6*32mm, 5.0 type | SC9391 | Red PTFE/White Silicone/Red PTFE Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| VR935 | 1.5mL Amber 9mm Screw Vial, High Recovery with 30UL Reservoir,11.6'32mm, 5.0 type | SC9192 | White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, Colsed-top |
| VP923 | 1.5mL Clear PP 9mm Screw Vial, 11 .6*32mm | SC9194 | White PTFE/Red Silicone Septa, 9mm Black Short Screw PP Cap, Colsed-top |
| VP945 | 1.5mL Amber PP 9mm Screw Vial, 11.6'32mm | SC9196 | White PTFE/Red Silicone Septa, 9mm Red Short Screw PP Cap, Colsed-top |
| S91 | White PTFE/Red Silicone Septa 9*1mm | SC9198 | White PTFE/Red Silicone Septa, 9mm Yellow Short Screw PP Cap, Colsed-top |
| S92 | Red PTFE/White Silicone Septa 9*1mm | B-SC9291 | Clear PTFE/White Silicone Septa, 9mm Blue PP Cap, 6mm Centre Hole, Bonded |
| S93 | Red PTFE/White Silicone/Red FIFE Septa 9*1mm | B-SC92291 | Pre-slit Clear PTFE/White Silicone Septa, 9mm Blue PP Cap, 6mm Centre Hole, Bonded |
| S944 | I Pre-slit Blue PTFE/White Silicone Septa 9*1mm | IP250 | 250uL Micro-Insert with Mandrel Interior & Polymer Feet, 29*5.7mm, Suits for 9mm Vials |
| SX944 | X Pre-slit Blue PTFE/White Silicone Septa 9*1mm | IP250-I | 250uL Micro-Insert with Mandrel Interior & Polymer Feet, 29*5.7mm, Suits for 9mm Vials, Economy Package |
| C91 | 9mm Black Screw PP Cap, 5.5mm Centre Hole | IV250 | 250u1 Insert , Conical Bottom, 31*5.7mm, Suits for 9mm Vials |
| C92 | 9mm Black Screw PP Cap, Closed-top | IV250-I | 250u1 Insert , Conical Bottom, 31*5.7mm, Suits for 9mm Vials, Economy Package |
| C93 | 9mm White Screw PP Cap, 5.5mm Centre Hole | I300 | 300uL Micro-Insert, 31*5.6mm, Clear, Flat Bottom, Suits for 9mm Vials |
| C95 | 9mm Red Short Screw PP cap, 6mm Centre Hole | C97 | 9mm Yellow Short Screw PP cap, 6mm Centre Hole |
Aijiren Technologies HPLC / G1316C TCC / G4212A DAD / BIN PUMP / Sampler located in USA available on Kitmondo.com.
Apr 12, 2016 If you would like to read more about how to troubleshoot and reduce sample carryover (carry-over) in HPLC and LC-MS systems for this and ...
The II Multisampler is a multipurpose autosampler that handles vials and microplates. Injecting at pressures up to 1300 bar, the Multisampler
Iso9001 11mm snap top hplc vials aijiren ii -Aijiren hplc lab vialsAijiren Lab LC Series Specification CompendiumAijiren
Feb 13, 2003 This manual covers the Aijiren II Diode Array ... If the bench shall carry a complete HPLC system, make sure that the.
The Aijiren II Multisampler can handle both vials and microtiter plates with ease and efficiency up to 1300 bar system pressure.
Sciencix is an industry leading name in supplying high quality HPLC and Mass Spectrometry repair parts that are cost effective and well stocked for same day
A commercially available sample was separated on each system using typical instrument parameters and analysis run times. Figure 1. ACT label for an Aijiren
samples in containers such as vials, tubes, or well plates, draw a specified sample volume, and inject it into the reversed-phase HPLC system. The collector.
Aijiren HPLC columns and supplies are designed, tested, and manufactured with With binary and quaternary pump options, The Aijiren LC is ...
Feb 3, 2022 Manufacturer: Aijiren Technologies · Model: G · Condition: Used · Seller InformationMcKinley Scientific · Phone Number Login / Register ...
A list of the most commonly ordered supplies and parts for the II LC with Multisampler. Quick Reference Guides
The Aijiren OpenLAB Chromatography Data System (CDS) workstation and the Aijiren Variable Wavelength Detector (VWD) enable the LC to operate
The Aijiren II Vialsampler ( B) is an autosampler designed for Aijiren recommends that you install the HPLC instrument in the ...
This high-throughput UHPLC system boosts sample throughput through fastest analysis speeds and shortest injection cycles while the Aijiren II