| V913 | 1.5mL Clear Screw Neck Vial, 9mm Thread,5.0 type | SC9191 | White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V923 | 1.5mL Clear Screw Neck Vial w/Write-on Spot, 9mm Thread,5.0 type | SC91191 | Pre-slit White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V935 | 1.5mL Amber Screw Neck Vial, 9mm Thread,5.0 type | SC9291 | Red PTFE/White Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V945 | 1.5mL Amber Screw Neck Vial w/Write-on Spot. 9mm Thread,5.0 type | SC92291 | Pre-slit Red PTFE/White Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| VR913 | 1.5mL Clear 9mm Screw Vial, High Recovery with 30UL Reservoir,11.6*32mm, 5.0 type | SC9391 | Red PTFE/White Silicone/Red PTFE Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| VR935 | 1.5mL Amber 9mm Screw Vial, High Recovery with 30UL Reservoir,11.6'32mm, 5.0 type | SC9192 | White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, Colsed-top |
| VP923 | 1.5mL Clear PP 9mm Screw Vial, 11 .6*32mm | SC9194 | White PTFE/Red Silicone Septa, 9mm Black Short Screw PP Cap, Colsed-top |
| VP945 | 1.5mL Amber PP 9mm Screw Vial, 11.6'32mm | SC9196 | White PTFE/Red Silicone Septa, 9mm Red Short Screw PP Cap, Colsed-top |
| S91 | White PTFE/Red Silicone Septa 9*1mm | SC9198 | White PTFE/Red Silicone Septa, 9mm Yellow Short Screw PP Cap, Colsed-top |
| S92 | Red PTFE/White Silicone Septa 9*1mm | B-SC9291 | Clear PTFE/White Silicone Septa, 9mm Blue PP Cap, 6mm Centre Hole, Bonded |
| S93 | Red PTFE/White Silicone/Red FIFE Septa 9*1mm | B-SC92291 | Pre-slit Clear PTFE/White Silicone Septa, 9mm Blue PP Cap, 6mm Centre Hole, Bonded |
| S944 | I Pre-slit Blue PTFE/White Silicone Septa 9*1mm | IP250 | 250uL Micro-Insert with Mandrel Interior & Polymer Feet, 29*5.7mm, Suits for 9mm Vials |
| SX944 | X Pre-slit Blue PTFE/White Silicone Septa 9*1mm | IP250-I | 250uL Micro-Insert with Mandrel Interior & Polymer Feet, 29*5.7mm, Suits for 9mm Vials, Economy Package |
| C91 | 9mm Black Screw PP Cap, 5.5mm Centre Hole | IV250 | 250u1 Insert , Conical Bottom, 31*5.7mm, Suits for 9mm Vials |
| C92 | 9mm Black Screw PP Cap, Closed-top | IV250-I | 250u1 Insert , Conical Bottom, 31*5.7mm, Suits for 9mm Vials, Economy Package |
| C93 | 9mm White Screw PP Cap, 5.5mm Centre Hole | I300 | 300uL Micro-Insert, 31*5.6mm, Clear, Flat Bottom, Suits for 9mm Vials |
| C95 | 9mm Red Short Screw PP cap, 6mm Centre Hole | C97 | 9mm Yellow Short Screw PP cap, 6mm Centre Hole |
The Aijiren II Prime LC is the most capable and convenient LC Includes solvent bottles 1 L (3 clear, 1 amber), identification rings and.
Aijiren II Liquid Chromatography System is a robust HPLC that offers the widest choice of modules for analytical HPLC and entry-level UHPLC,
Discussions about HPLC, CE, TLC, SFC, and other "liquid phase" separation techniques. 5 posts Page 1 of 1. Aijiren Vialsampler errors.
The II Multisampler can handle both vials and microtiter plates with ease and efficiency, and is designed for low carryover, as you can take clean
Solvent is bypassed from the autosampler by the injection valve during the sampling sequence. The needle moves to the desired sample vial position and is
Aijiren Lab LC Series Vialsamplers User Manual. 3. In This Book: This manual covers the following modules: • Aijiren II Vialsampler .
The II LC System is a robust high performance liquid chromatography instrument that offers the widest choice of modules for analytical HPLC
The II Vialsampler combines sample management and column handling in a single autosampler module. The Vialsampler injects from up to 132
Feb 13, 2003 Do not proceed beyond a. WARNING notice until the indi- cated conditions are fully understood and met. Page 3. Aijiren Lab LC Series ...
Sep 1, 2015 The Aijiren II Vialsampler is designed for UHPLC applications ... Capacity for up to 132 vials (2 mL) or up to 36 vials (6 mL).
The sample tray can hold up to two well plates, vial plates or Eppendorf tube The Aijiren Dual-Loop Autosampler is a fixed loop sampler ...
The Aijiren HPLC System's quaternary pump is based on a two-channel, dual-plunger in-series design which comprises all essential functions
Feb 13, 2003 vials and 15 × 6 mL vials respectively. Any two half-size rack trays can be installed in the autosamplers simultaneously. A specially designed.
The II Preparative LC System is an easy-to-use workhorse for automated sample injection when gradient elution is required for sample
Introduction Product Description Product Description The II Preparative Autosampler is designed for laboratories that need automated sample