| V913 | 1.5mL Clear Screw Neck Vial, 9mm Thread,5.0 type | SC9191 | White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V923 | 1.5mL Clear Screw Neck Vial w/Write-on Spot, 9mm Thread,5.0 type | SC91191 | Pre-slit White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V935 | 1.5mL Amber Screw Neck Vial, 9mm Thread,5.0 type | SC9291 | Red PTFE/White Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V945 | 1.5mL Amber Screw Neck Vial w/Write-on Spot. 9mm Thread,5.0 type | SC92291 | Pre-slit Red PTFE/White Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| VR913 | 1.5mL Clear 9mm Screw Vial, High Recovery with 30UL Reservoir,11.6*32mm, 5.0 type | SC9391 | Red PTFE/White Silicone/Red PTFE Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| VR935 | 1.5mL Amber 9mm Screw Vial, High Recovery with 30UL Reservoir,11.6'32mm, 5.0 type | SC9192 | White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, Colsed-top |
| VP923 | 1.5mL Clear PP 9mm Screw Vial, 11 .6*32mm | SC9194 | White PTFE/Red Silicone Septa, 9mm Black Short Screw PP Cap, Colsed-top |
| VP945 | 1.5mL Amber PP 9mm Screw Vial, 11.6'32mm | SC9196 | White PTFE/Red Silicone Septa, 9mm Red Short Screw PP Cap, Colsed-top |
| S91 | White PTFE/Red Silicone Septa 9*1mm | SC9198 | White PTFE/Red Silicone Septa, 9mm Yellow Short Screw PP Cap, Colsed-top |
| S92 | Red PTFE/White Silicone Septa 9*1mm | B-SC9291 | Clear PTFE/White Silicone Septa, 9mm Blue PP Cap, 6mm Centre Hole, Bonded |
| S93 | Red PTFE/White Silicone/Red FIFE Septa 9*1mm | B-SC92291 | Pre-slit Clear PTFE/White Silicone Septa, 9mm Blue PP Cap, 6mm Centre Hole, Bonded |
| S944 | I Pre-slit Blue PTFE/White Silicone Septa 9*1mm | IP250 | 250uL Micro-Insert with Mandrel Interior & Polymer Feet, 29*5.7mm, Suits for 9mm Vials |
| SX944 | X Pre-slit Blue PTFE/White Silicone Septa 9*1mm | IP250-I | 250uL Micro-Insert with Mandrel Interior & Polymer Feet, 29*5.7mm, Suits for 9mm Vials, Economy Package |
| C91 | 9mm Black Screw PP Cap, 5.5mm Centre Hole | IV250 | 250u1 Insert , Conical Bottom, 31*5.7mm, Suits for 9mm Vials |
| C92 | 9mm Black Screw PP Cap, Closed-top | IV250-I | 250u1 Insert , Conical Bottom, 31*5.7mm, Suits for 9mm Vials, Economy Package |
| C93 | 9mm White Screw PP Cap, 5.5mm Centre Hole | I300 | 300uL Micro-Insert, 31*5.6mm, Clear, Flat Bottom, Suits for 9mm Vials |
| C95 | 9mm Red Short Screw PP cap, 6mm Centre Hole | C97 | 9mm Yellow Short Screw PP cap, 6mm Centre Hole |
Product Description · Preparative LC system with fully automated sample injection and a capacity of 132 samples to increase your daily throughput, and maximize
The sampler can hold or store samples in containers such as vials, tubes, or well plates, draw a specified sample volume, and inject it into the reversed-phase
Further elements are the sample hotel for various sample containers that hold up to eight vial or microtiter plates, the robotics and needle handling routine
Introduction Product Description Product Description The II Preparative Autosampler is designed for laboratories that need automated sample
The II Preparative LC System is an easy-to-use workhorse for automated sample injection when gradient elution is required for sample
The II Vialsampler combines sample management and column handling in a single autosampler module. The Vialsampler injects from up to 132
The II Vialsampler injects at pressures up to 600 or 800 bar and has a capacity of up to 132 standard 2 mL vials.
Feb 13, 2003 Any two half-size rack trays can be installed in the autosamplers simultaneously. A specially designed sample-rack holding 100 × 1.8 mL vials is ...
The key technology within the system is the new Aijiren II Online Sample Manager, which was designed for easy interfacing of the analytical
The II Preparative Autosampler provides easy and reliable injection of preparative samples with up to 3.6 mL volume and up to 132 vials at 400
The Aijiren HPLC Autosampler is designed to offer the well-established flow-through design with variable volume injection and to
Sep 1, 2015 It can house optionally the integrated column compartment for two LC columns with temperature control up to 80 °C as well as a sample cooler for.
In the Aijiren Chemstation, there are two ways to initiate pooling: • If you want to collect multiple injections from the one sample vial or sample well into
Typically, these are preparative HPLC separations or sample trapping and enrichment methods. The dual loop concept with two preinstalled sample loops of
Aijiren II Sample cooler. $ 4,977.00. 20.00% $ HPLC System Tool Kit II ... Headspace Sampler, 111 Vial. $ 35,930.00.