Graphic customization clear 2ml sample vials with ptfe liner pp cap supplier

Introduction. MS ® 2ml Sample vials improve your laboratory productivity, by reducing costs and saving time. The cleanest on the market, these products considerably reduce the risk of test results compromised by ghost peaks, damaged needles or dislodged septa, decreasing analysis failures and sample reruns.

These vials are made from clear KIMAX® KG-33 borosilicate glass. with PTFE-lined screw cap, KIMBLE® Supplier: ... Sample vials, with PTFE-lined screw cap ...

Good Seal 2ml Plastic Sample Vials With Micro Insert Inside Screw Cap Ptfe Silica Gel , Find Complete Details about Good Seal 2ml Plastic Sample Vials With Micro Insert Inside Screw Cap Ptfe Silica Gel,Plastic Sample Vials,Ptfe Silica Gel,9-425 Plastic Vial from Laboratory Bottle Supplier or Manufacturer-Zhejiang Aijiren Technologies Co., Ltd.

Vials, screw top with solid green Thermoset cap with PTFE liner, preassembled, pkg of 100 volume 22 mL, clear glass vial, O.D. × H 23 mm × 85 mm, thread for 20-400 pricing 27181

The flared end also makes the vial much stronger so that vials can easily be inserted and removed from the end of the probe using tweezers without breaking the glass. MS® caps and septa are available for different types of sample vials. Its vial products improve your laboratory productivity, by reducing costs and saving time. Sample Vial PDF

Quality vials are essential for reliable analytical results. All Waters Certified Vials are tested by LC or LC/MS to assure quality and cleanliness. The test results confirm the vials, cap and septa have been properly manufactured, handled and packaged, and are free from any potential contaminants which could result in chromatographic ghost peaks.

Clear and amber sample vials are pre-cleaned and certified for volatile organic analysis. Vials are fully assembled with green polypropylene closure and 0.125” PTFE silicone septa. Made from Type 1 borosilicate glass. Certificate of analysis is included in each case. Packed 72 pieces per case.

Each vial comes with an attached polypropylene cap with foam backed PTFE liner (PTFE/F217) or Silicone backed PTFE liner. Both the clear and amber dram sample vials are made of Type I borosilicate glass, providing exceptional resistance to heat shock and chemical leaching.

5mL x 0. 63mm outer diameter syringe 2mL clear sample vials (144) 2mL amber sample vials (100) blue crimp caps with septa (100) green crimp caps with septa (100) red crimp caps with septa (100) septa for waste/wash vials (100) crimper - 11mm decapper - 11 mm 2 mL vial rack

Sample Vials Wide selection of vials, including HPLC Certified vials (tested by HPLC for cleanliness) and LCMS Certified vials (tested for total ion count and presence of clusters in the high mass range). These are the cleanest vials in the industry.

We are currently experiencing issues with our toll-free 800 numbers. To reach us, please contact us at 419-228-2242.

These economically priced sample vials are conveniently packed in two shrink-wrapped packs of 100 vials. This packaging reduces contamination from corrugated material found in traditional packaging. The amber vials are manufactured from Wheaton 320 amber glass that conforms to USP Type I requirements to protect light-sensitive samples. Black phenolic screw caps are packaged separately and

11mm Crimp Top Autosampler Vials are made of clear Type 1, Class A Borosilicate Glass with a writable label for sample identification, and included Aluminium cap with hole & Septa(Red PTFE/White silicone septa) 2ml HPLC vials have most close space tolerance and each package product with validation MS scans and Vial/cap/septum combination tested

Choose clear glass for maximum visibility or, for UV protection, cobalt blue, green or amber glass sample vials. A wide selection of caps is available attached or purchased separately. Choose from our standard screw thread glass sample vials or the wider mouth short compound vials.

For internal standardization method or bioluminescence studies. This cap allows direct injection of a liquid by means of a syringe through a center hole on the cap and a rubber septum with PTFE lining. For use with 20 mL glass (part number 6000128) or plastic (part number 6001085) vials.