| V913 | 1.5mL Clear Screw Neck Vial, 9mm Thread,5.0 type | SC9191 | White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V923 | 1.5mL Clear Screw Neck Vial w/Write-on Spot, 9mm Thread,5.0 type | SC91191 | Pre-slit White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V935 | 1.5mL Amber Screw Neck Vial, 9mm Thread,5.0 type | SC9291 | Red PTFE/White Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V945 | 1.5mL Amber Screw Neck Vial w/Write-on Spot. 9mm Thread,5.0 type | SC92291 | Pre-slit Red PTFE/White Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| VR913 | 1.5mL Clear 9mm Screw Vial, High Recovery with 30UL Reservoir,11.6*32mm, 5.0 type | SC9391 | Red PTFE/White Silicone/Red PTFE Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| VR935 | 1.5mL Amber 9mm Screw Vial, High Recovery with 30UL Reservoir,11.6'32mm, 5.0 type | SC9192 | White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, Colsed-top |
| VP923 | 1.5mL Clear PP 9mm Screw Vial, 11 .6*32mm | SC9194 | White PTFE/Red Silicone Septa, 9mm Black Short Screw PP Cap, Colsed-top |
| VP945 | 1.5mL Amber PP 9mm Screw Vial, 11.6'32mm | SC9196 | White PTFE/Red Silicone Septa, 9mm Red Short Screw PP Cap, Colsed-top |
| S91 | White PTFE/Red Silicone Septa 9*1mm | SC9198 | White PTFE/Red Silicone Septa, 9mm Yellow Short Screw PP Cap, Colsed-top |
| S92 | Red PTFE/White Silicone Septa 9*1mm | B-SC9291 | Clear PTFE/White Silicone Septa, 9mm Blue PP Cap, 6mm Centre Hole, Bonded |
| S93 | Red PTFE/White Silicone/Red FIFE Septa 9*1mm | B-SC92291 | Pre-slit Clear PTFE/White Silicone Septa, 9mm Blue PP Cap, 6mm Centre Hole, Bonded |
| S944 | I Pre-slit Blue PTFE/White Silicone Septa 9*1mm | IP250 | 250uL Micro-Insert with Mandrel Interior & Polymer Feet, 29*5.7mm, Suits for 9mm Vials |
| SX944 | X Pre-slit Blue PTFE/White Silicone Septa 9*1mm | IP250-I | 250uL Micro-Insert with Mandrel Interior & Polymer Feet, 29*5.7mm, Suits for 9mm Vials, Economy Package |
| C91 | 9mm Black Screw PP Cap, 5.5mm Centre Hole | IV250 | 250u1 Insert , Conical Bottom, 31*5.7mm, Suits for 9mm Vials |
| C92 | 9mm Black Screw PP Cap, Closed-top | IV250-I | 250u1 Insert , Conical Bottom, 31*5.7mm, Suits for 9mm Vials, Economy Package |
| C93 | 9mm White Screw PP Cap, 5.5mm Centre Hole | I300 | 300uL Micro-Insert, 31*5.6mm, Clear, Flat Bottom, Suits for 9mm Vials |
| C95 | 9mm Red Short Screw PP cap, 6mm Centre Hole | C97 | 9mm Yellow Short Screw PP cap, 6mm Centre Hole |
Aijiren autosampler vial trays and drawers are designed to ensure that your autosampler setup is perfectly equipped to deal with a wide variety of
Aijiren recommends that you install the HPLC instrument in the Lab Magnets in doors of pumps, autosamplers, detectors, and fraction collectors.
INSTRUMENT AND MODULE KITS. Aijiren ESSENTIAL CHROMATOGRAPHY AND SPECTROSCOPY CATALOG— LAB LC SUPPLIES. Autosampler Maintenance Schedule. Procedure.
Aijiren vials and caps provide simple ways to boost laboratory productivity and return on investment. Aijiren premium certified vials, caps, high recovery
The table below illustrates that the Aijiren CrossLab vial portfolio is compatible with a wide range of HPLC and GC autosamplers.
The II Diode Array Detector HS offers full spectral detection from 190 to 640 nm for compound identification using spectral libraries or
Feb 25, 2010 If the bench shall carry a complete HPLC system, make sure that the bench ... the vial with a cap and place the vial into autosampler tray ...
Aijiren offers a wide selection of certified, long-life lamps for your Aijiren HPLC systems. The new Lab lamps contain RFID technology for more