| V913 | 1.5mL Clear Screw Neck Vial, 9mm Thread,5.0 type | SC9191 | White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V923 | 1.5mL Clear Screw Neck Vial w/Write-on Spot, 9mm Thread,5.0 type | SC91191 | Pre-slit White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V935 | 1.5mL Amber Screw Neck Vial, 9mm Thread,5.0 type | SC9291 | Red PTFE/White Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V945 | 1.5mL Amber Screw Neck Vial w/Write-on Spot. 9mm Thread,5.0 type | SC92291 | Pre-slit Red PTFE/White Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| VR913 | 1.5mL Clear 9mm Screw Vial, High Recovery with 30UL Reservoir,11.6*32mm, 5.0 type | SC9391 | Red PTFE/White Silicone/Red PTFE Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| VR935 | 1.5mL Amber 9mm Screw Vial, High Recovery with 30UL Reservoir,11.6'32mm, 5.0 type | SC9192 | White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, Colsed-top |
| VP923 | 1.5mL Clear PP 9mm Screw Vial, 11 .6*32mm | SC9194 | White PTFE/Red Silicone Septa, 9mm Black Short Screw PP Cap, Colsed-top |
| VP945 | 1.5mL Amber PP 9mm Screw Vial, 11.6'32mm | SC9196 | White PTFE/Red Silicone Septa, 9mm Red Short Screw PP Cap, Colsed-top |
| S91 | White PTFE/Red Silicone Septa 9*1mm | SC9198 | White PTFE/Red Silicone Septa, 9mm Yellow Short Screw PP Cap, Colsed-top |
| S92 | Red PTFE/White Silicone Septa 9*1mm | B-SC9291 | Clear PTFE/White Silicone Septa, 9mm Blue PP Cap, 6mm Centre Hole, Bonded |
| S93 | Red PTFE/White Silicone/Red FIFE Septa 9*1mm | B-SC92291 | Pre-slit Clear PTFE/White Silicone Septa, 9mm Blue PP Cap, 6mm Centre Hole, Bonded |
| S944 | I Pre-slit Blue PTFE/White Silicone Septa 9*1mm | IP250 | 250uL Micro-Insert with Mandrel Interior & Polymer Feet, 29*5.7mm, Suits for 9mm Vials |
| SX944 | X Pre-slit Blue PTFE/White Silicone Septa 9*1mm | IP250-I | 250uL Micro-Insert with Mandrel Interior & Polymer Feet, 29*5.7mm, Suits for 9mm Vials, Economy Package |
| C91 | 9mm Black Screw PP Cap, 5.5mm Centre Hole | IV250 | 250u1 Insert , Conical Bottom, 31*5.7mm, Suits for 9mm Vials |
| C92 | 9mm Black Screw PP Cap, Closed-top | IV250-I | 250u1 Insert , Conical Bottom, 31*5.7mm, Suits for 9mm Vials, Economy Package |
| C93 | 9mm White Screw PP Cap, 5.5mm Centre Hole | I300 | 300uL Micro-Insert, 31*5.6mm, Clear, Flat Bottom, Suits for 9mm Vials |
| C95 | 9mm Red Short Screw PP cap, 6mm Centre Hole | C97 | 9mm Yellow Short Screw PP cap, 6mm Centre Hole |
However, substandard vials, caps, and septa can lead to sample loss, Unsurpassed rigor in quality control and manufacturing ... HPLC and GC.
Triple your sample capacity within the footprint of the II prime removable stickers for solvent bottles, vials (2 mL) clear with bonded.
not block the openings on the circumference of the Sample Thermostat. NOTE. Aijiren recommends that you install the HPLC instrument in the Lab Flex.
The sampling interval of the diode array is < 1 nm over the wavelength range Aijiren recommends that you install the HPLC instrument in the Lab ...
Explore Aijiren's vials, caps, vial inserts and more provide to find just the right solution to protect and store your samples.
The table below illustrates that the Aijiren CrossLab vial portfolio is compatible with a wide range of HPLC and GC autosamplers.
Feb 25, 2010 The sampling interval of the diode array is < 1 nm over the wavelength ... If the bench shall carry a complete HPLC system, make sure that ...
Sample Trays for HPLC. Aijiren autosampler vial trays and drawers are designed to ensure that your autosampler setup is perfectly equipped to deal with a