| V913 | 1.5mL Clear Screw Neck Vial, 9mm Thread,5.0 type | SC9191 | White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V923 | 1.5mL Clear Screw Neck Vial w/Write-on Spot, 9mm Thread,5.0 type | SC91191 | Pre-slit White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V935 | 1.5mL Amber Screw Neck Vial, 9mm Thread,5.0 type | SC9291 | Red PTFE/White Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V945 | 1.5mL Amber Screw Neck Vial w/Write-on Spot. 9mm Thread,5.0 type | SC92291 | Pre-slit Red PTFE/White Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| VR913 | 1.5mL Clear 9mm Screw Vial, High Recovery with 30UL Reservoir,11.6*32mm, 5.0 type | SC9391 | Red PTFE/White Silicone/Red PTFE Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| VR935 | 1.5mL Amber 9mm Screw Vial, High Recovery with 30UL Reservoir,11.6'32mm, 5.0 type | SC9192 | White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, Colsed-top |
| VP923 | 1.5mL Clear PP 9mm Screw Vial, 11 .6*32mm | SC9194 | White PTFE/Red Silicone Septa, 9mm Black Short Screw PP Cap, Colsed-top |
| VP945 | 1.5mL Amber PP 9mm Screw Vial, 11.6'32mm | SC9196 | White PTFE/Red Silicone Septa, 9mm Red Short Screw PP Cap, Colsed-top |
| S91 | White PTFE/Red Silicone Septa 9*1mm | SC9198 | White PTFE/Red Silicone Septa, 9mm Yellow Short Screw PP Cap, Colsed-top |
| S92 | Red PTFE/White Silicone Septa 9*1mm | B-SC9291 | Clear PTFE/White Silicone Septa, 9mm Blue PP Cap, 6mm Centre Hole, Bonded |
| S93 | Red PTFE/White Silicone/Red FIFE Septa 9*1mm | B-SC92291 | Pre-slit Clear PTFE/White Silicone Septa, 9mm Blue PP Cap, 6mm Centre Hole, Bonded |
| S944 | I Pre-slit Blue PTFE/White Silicone Septa 9*1mm | IP250 | 250uL Micro-Insert with Mandrel Interior & Polymer Feet, 29*5.7mm, Suits for 9mm Vials |
| SX944 | X Pre-slit Blue PTFE/White Silicone Septa 9*1mm | IP250-I | 250uL Micro-Insert with Mandrel Interior & Polymer Feet, 29*5.7mm, Suits for 9mm Vials, Economy Package |
| C91 | 9mm Black Screw PP Cap, 5.5mm Centre Hole | IV250 | 250u1 Insert , Conical Bottom, 31*5.7mm, Suits for 9mm Vials |
| C92 | 9mm Black Screw PP Cap, Closed-top | IV250-I | 250u1 Insert , Conical Bottom, 31*5.7mm, Suits for 9mm Vials, Economy Package |
| C93 | 9mm White Screw PP Cap, 5.5mm Centre Hole | I300 | 300uL Micro-Insert, 31*5.6mm, Clear, Flat Bottom, Suits for 9mm Vials |
| C95 | 9mm Red Short Screw PP cap, 6mm Centre Hole | C97 | 9mm Yellow Short Screw PP cap, 6mm Centre Hole |
air from the area above the sample vial tray of the autosampler. It is then If the bench shall carry a complete HPLC system, make sure that the.
Drawer choice 5x 10 vials (2 mL), 2 drawers included, #012. Extended Injection Range Option 900 µL analytical head and sample loop for large
and Aijiren II Vialsampler B using 66-vial plates, 18-vial plates, ... Free sample hplc vials with caps for liquid autosampler.
to designate those manufacturers' products as supplied by SCIEX for incorporation and Aijiren II Vialsampler B using 66-vial.
High capacity - up to 132 vials (2 mL) or up to 36 vials (6 mL). Reliable injections - 0.1 to 100 µL injections for up to 600 bar ( ) and up to 800 bar (
The Aijiren II Multisampler can handle both vials and microtiter Aijiren recommends that you install the HPLC instrument in the ...
-87017. Needle seat, PEEK, 0.17 mm ID capillary, for II vial sampler. Add to Favorites.
-60400 Aijiren Sample loop, 40 uL, for Aijiren II vial sampler - AA Vendors Other Products. View All Products ...
The /B/C Vialsampler and the G7157A Preparative Autosampler offer two See below the available vial drawers along with their sample capacity and ...
Aijiren HPLC Aijiren ALS Autosampler Main Board p/n: G4226-65000 *parts Aijiren 2 Sample Transport Assembly VS ( -60600 ).
Sciencix is an industry leading name in supplying high quality HPLC and Mass Spectrometry repair parts that are cost effective and well stocked for same day
Aijiren Technologies. Home | Sample Preparation | Certified Vials | LC Columns | Genomics Division. Aijiren Authorized Distributor logo
The Vialsampler injects from up to 132 standard 2 mL vials and has a pressure rating of 600 or 800 bar. Options and upgrades are available for sample cooling
It can house optionally the integrated column compartment for two LC columns with temperature control up to 80 °C as well as a sample cooler for stable
Sample Trays for HPLC. Part Number: -60000. External tray, for 5 x 2 mL vials. Add to Favorites. + Create New list. Item successfully added to your