| V913 | 1.5mL Clear Screw Neck Vial, 9mm Thread,5.0 type | SC9191 | White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V923 | 1.5mL Clear Screw Neck Vial w/Write-on Spot, 9mm Thread,5.0 type | SC91191 | Pre-slit White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V935 | 1.5mL Amber Screw Neck Vial, 9mm Thread,5.0 type | SC9291 | Red PTFE/White Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V945 | 1.5mL Amber Screw Neck Vial w/Write-on Spot. 9mm Thread,5.0 type | SC92291 | Pre-slit Red PTFE/White Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| VR913 | 1.5mL Clear 9mm Screw Vial, High Recovery with 30UL Reservoir,11.6*32mm, 5.0 type | SC9391 | Red PTFE/White Silicone/Red PTFE Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| VR935 | 1.5mL Amber 9mm Screw Vial, High Recovery with 30UL Reservoir,11.6'32mm, 5.0 type | SC9192 | White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, Colsed-top |
| VP923 | 1.5mL Clear PP 9mm Screw Vial, 11 .6*32mm | SC9194 | White PTFE/Red Silicone Septa, 9mm Black Short Screw PP Cap, Colsed-top |
| VP945 | 1.5mL Amber PP 9mm Screw Vial, 11.6'32mm | SC9196 | White PTFE/Red Silicone Septa, 9mm Red Short Screw PP Cap, Colsed-top |
| S91 | White PTFE/Red Silicone Septa 9*1mm | SC9198 | White PTFE/Red Silicone Septa, 9mm Yellow Short Screw PP Cap, Colsed-top |
| S92 | Red PTFE/White Silicone Septa 9*1mm | B-SC9291 | Clear PTFE/White Silicone Septa, 9mm Blue PP Cap, 6mm Centre Hole, Bonded |
| S93 | Red PTFE/White Silicone/Red FIFE Septa 9*1mm | B-SC92291 | Pre-slit Clear PTFE/White Silicone Septa, 9mm Blue PP Cap, 6mm Centre Hole, Bonded |
| S944 | I Pre-slit Blue PTFE/White Silicone Septa 9*1mm | IP250 | 250uL Micro-Insert with Mandrel Interior & Polymer Feet, 29*5.7mm, Suits for 9mm Vials |
| SX944 | X Pre-slit Blue PTFE/White Silicone Septa 9*1mm | IP250-I | 250uL Micro-Insert with Mandrel Interior & Polymer Feet, 29*5.7mm, Suits for 9mm Vials, Economy Package |
| C91 | 9mm Black Screw PP Cap, 5.5mm Centre Hole | IV250 | 250u1 Insert , Conical Bottom, 31*5.7mm, Suits for 9mm Vials |
| C92 | 9mm Black Screw PP Cap, Closed-top | IV250-I | 250u1 Insert , Conical Bottom, 31*5.7mm, Suits for 9mm Vials, Economy Package |
| C93 | 9mm White Screw PP Cap, 5.5mm Centre Hole | I300 | 300uL Micro-Insert, 31*5.6mm, Clear, Flat Bottom, Suits for 9mm Vials |
| C95 | 9mm Red Short Screw PP cap, 6mm Centre Hole | C97 | 9mm Yellow Short Screw PP cap, 6mm Centre Hole |
Manufacturer of Liquid Chromatography System - Aijiren II Preparative Liquid Chromatography System, Rs 80 Lakhs / UnitGet Latest Price.
Pump Valve Clusters for /B, , G5654A II Preparative Autosampler G7157A1 ... from sample vials. Per default, it uses a 100 µl ...
Oct 27, 2019 supported in the autosampler. ... Shimadzu PDA at sampling rates higher than 12.5 ... Aijiren LC: If a sample vial is missing, then the.
Feb 9, 2021 Aijiren II HPLC System with G7165A MWD. Manufacturer: Aijiren Technologies ... Price. In Stock. For more information ...
Aijiren Technologies. Flow Rate: 0.05 to 5 mL/min with ; 0.2 to 10 mL/min with , , ... i-Series Integrated HPLC/UHPLC ...
Setting up the Autosampler with Aijiren OpenLab CDS ChemStation Edition 118 The Aijiren II Multisampler can handle both vials and ...
Aijiren ESSENTIAL CHROMATOGRAPHY AND SPECTROSCOPY CATALOG— LAB LC are the only vials that deliver time and cost-saving advantages like these:.
May 22, 2018 This technical note is valid for the Aijiren HPLC System. Firmware Bulletin Firmware. ... II Binary Pump ( , G4782A SFC) .
Feb 13, 2003 stability, especially at low flow rates, for maximum detector ... compresses the solvent until the operating pressure of the HPLC system is.
Solvent is bypassed from the autosampler by the injection valve during the sampling sequence. The needle moves to the desired sample vial position and is
Aijiren Certified Vials, and NEW Aijiren CrossLab Vials for non-Aijiren Aijiren Advantage Bronze – Total repair coverage at a fixed annual price.
High gradient performance - even at low % B and narrow-bore flow rates. solvent until the operating pressure of the HPLC system is reached. The outlet.
Support of flow rates up to 100 mL/min at 400 bar Laboratory efficiency • Maximum capacity of 132 sample vials within the same foot print • Flexible and
This pump delivers reproducible gradients for routine HPLC or UHPLC Narrow-bore flow rates even at low percentages of organic solvent delivers high ...
PM kit for binary pump ( ) kit. Drawer for 66 x 2 mL vials. -60010. Drawer for 18 x 6 mL vials. -60110.