| V913 | 1.5mL Clear Screw Neck Vial, 9mm Thread,5.0 type | SC9191 | White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V923 | 1.5mL Clear Screw Neck Vial w/Write-on Spot, 9mm Thread,5.0 type | SC91191 | Pre-slit White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V935 | 1.5mL Amber Screw Neck Vial, 9mm Thread,5.0 type | SC9291 | Red PTFE/White Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| V945 | 1.5mL Amber Screw Neck Vial w/Write-on Spot. 9mm Thread,5.0 type | SC92291 | Pre-slit Red PTFE/White Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| VR913 | 1.5mL Clear 9mm Screw Vial, High Recovery with 30UL Reservoir,11.6*32mm, 5.0 type | SC9391 | Red PTFE/White Silicone/Red PTFE Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole |
| VR935 | 1.5mL Amber 9mm Screw Vial, High Recovery with 30UL Reservoir,11.6'32mm, 5.0 type | SC9192 | White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, Colsed-top |
| VP923 | 1.5mL Clear PP 9mm Screw Vial, 11 .6*32mm | SC9194 | White PTFE/Red Silicone Septa, 9mm Black Short Screw PP Cap, Colsed-top |
| VP945 | 1.5mL Amber PP 9mm Screw Vial, 11.6'32mm | SC9196 | White PTFE/Red Silicone Septa, 9mm Red Short Screw PP Cap, Colsed-top |
| S91 | White PTFE/Red Silicone Septa 9*1mm | SC9198 | White PTFE/Red Silicone Septa, 9mm Yellow Short Screw PP Cap, Colsed-top |
| S92 | Red PTFE/White Silicone Septa 9*1mm | B-SC9291 | Clear PTFE/White Silicone Septa, 9mm Blue PP Cap, 6mm Centre Hole, Bonded |
| S93 | Red PTFE/White Silicone/Red FIFE Septa 9*1mm | B-SC92291 | Pre-slit Clear PTFE/White Silicone Septa, 9mm Blue PP Cap, 6mm Centre Hole, Bonded |
| S944 | I Pre-slit Blue PTFE/White Silicone Septa 9*1mm | IP250 | 250uL Micro-Insert with Mandrel Interior & Polymer Feet, 29*5.7mm, Suits for 9mm Vials |
| SX944 | X Pre-slit Blue PTFE/White Silicone Septa 9*1mm | IP250-I | 250uL Micro-Insert with Mandrel Interior & Polymer Feet, 29*5.7mm, Suits for 9mm Vials, Economy Package |
| C91 | 9mm Black Screw PP Cap, 5.5mm Centre Hole | IV250 | 250u1 Insert , Conical Bottom, 31*5.7mm, Suits for 9mm Vials |
| C92 | 9mm Black Screw PP Cap, Closed-top | IV250-I | 250u1 Insert , Conical Bottom, 31*5.7mm, Suits for 9mm Vials, Economy Package |
| C93 | 9mm White Screw PP Cap, 5.5mm Centre Hole | I300 | 300uL Micro-Insert, 31*5.6mm, Clear, Flat Bottom, Suits for 9mm Vials |
| C95 | 9mm Red Short Screw PP cap, 6mm Centre Hole | C97 | 9mm Yellow Short Screw PP cap, 6mm Centre Hole |
Mass spec cleaning, bottles, sample prep, and general laboratory supplies for your GC/MS/LC or other lab. Buy 10 different Micro-Mesh products here. These cushioned abrasives provide ultimate finishes. Polish metals, plastics and painted surfaces. Headlight restoration kits available.
Chromatography vials are containers designed to temporarily hold samples analyzed as a part of gas (GC) or liquid (HPLC) chromatography. Tisch Scientific offers an extensive selection of vials that have passed the ISO9001:2015 quality certification making them the highest quality in the industry to ensure the most accurate analysis of your samples.
Thermo Scientific crimp top vials for HPLC and GC are available in 8mm, 11mm, or 13mm crimp border diameter in clear and amber glass and plastic. Microsampling options for small-sample-volume injections include one-piece microvials and standard inserts added to crimp top vials. and standard inserts added to crimp top vials.
Vials Use only Aijiren vials, the shape, and the material is optimized for maximizing instrument precision. Do not overfill the vials. Fill the vial up to 1/2 to 2/3 of the total volume. Experimental conditions Make sure that the same solvents were used between the runs.
Aijiren Lab LC Series Vialsamplers User Manual 11 1Introduction Features ( ) Features ( ) • High capacity – up to 132 vials (2 mL) or up to 36 vials (6 mL). • Reliable injections – 0.1 to 100 µL injections for up to 600 bar ( ) and up to
In this lab, you’ll use the HPLC to perform quantitative analysis. This is possible because the area under each chromatographic peak is proportional to the concentration of each analyte. The general order for HPLC sample preparation is: (1) Prepare standard and quality control samples (QCs), (2) run standards and a QC, (3) prepare the samples, and (4) run the samples.
The standard automatic liquid sampler for the Aijiren HPLC system is designed for the dependability, Sample Capacity Options: 100 × 2-ml vials/standard tray 40 × 2-ml vials/standard tray 15 × 6-ml vials/half tray Microvials (100 or 300 µl) with sleeves ...
Membrane Solutions' Sample vials provide advantages over the standard straight glass sample vials. The flared end makes the vial much stronger so that vials can easily be inserted and removed using tweezers without breaking the glass.
AU $29.45. Free shipping . 2ml Clear/Aer Lab Vials & Caps for 2 ml vials and caps supplier,glass vials and caps manufacturer,Varian Autosampler 100pcs/pk. AU $17.38. AU $18.89. Free shipping . 100pcs Aer Autosampler Vials 2ml 9-425 HPLC Sample Glass Bottles with Caps.
QuanRecovery Vials and Plates with MaxPeak HPS Vials and plates to reduce non-specific binding in LC-MS bioanalysis, increasing sensitivity and repeatability. . Autosampler ready formats for small sample Sample Vials Wide selection of vials, including HPLC Certified vials (tested by HPLC for cleanliness) and LCMS Certified vials (tested for total ion count and presence of clusters in the high
Alibaba.com offers 1,014 lab autosampler vial products. A wide variety of lab autosampler vial options are available to you, such as classification, use. Related Searches for lab autosampler vial: laboratory machines 2ml plastic vial perfume vials laboratory furniture lab diamond lab coat laboratory ring mill vial cap lab grown diamond sms lab coat laboratory oven glass vial More...
LC Instrument Module Racks from Aijiren Choose from the Aijiren Rack for LC Systems which offers a sturdy and open design or the Lab Flex bench on wheels so you can easily move your instrument anywhere in the lab.
G 7129-60210 Classic drawer for 50 x 2 mL vial (left) G 7129-60220 Classic drawer for 50 x 2 mL vial (right) -60010 Drawer for 66 x 6 mL vials Continuously numbered alphanumeric vial position: 1;A,1 Note: These vial drawers require a new plate
2021/3/15 · Specification. The Aijiren ICF HPLC control module is compatible with selected components of Aijiren , 1120, , , and HPLC systems suppoorted by the Aijiren ICF. Exact list of controlled components is shown in the table below. List of controlled subdevices of the Aijiren
China Aijiren Vials - Select 2021 Aijiren Vials products from verified China Aijiren Vials manufacturers, suppliers on Made-in-China.com.