Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 9mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1pack
Alliance HT HPLC Systems. This vial delivers maximum sample capacity (~1.5 mL) with minimum residual volume. The 9 mm cap makes it ideal for use with Aijiren HPLC and GC Systems. Choosing the level of certified vial should be based on the concentration of analyte. Concentration of analytes is often tied closely with the detection source used.
Autosampler Vial Inserts Thermo Scientific™ Chromacol 9mm Wide-Opening Screw Thread Vial Inserts, Flat Bottom Clear glass or polypropylene inserts for 9mm HPLC and GC autosampler vials are available in a variety of configurations with usable volumes from 160μL to 3.5mL.
High Quality 2ml Hplc Vials with Screw Top Cap for Sale The Aijiren 2ml Hplc Vials is made of vanadium boric acid glass and meets international standards.So if there have any requirement about 2ml Hplc Vials,please contact with AijirenTech.
Fancy a chat? You can contact us on. Phone: 08452 30 40 30. Email: sales@labunlimited.co.uk Carl Stuart UK Limited. Unit 59, Frimley House. 35 High Street. Frimley, Surrey. GU16 7JQ
Chromacol innovative micro- and precision sampling products are made with high quality, stringent manufacturing tolerances that have been tested extensively for comprehensive autosampler compatibility. They were developed in close technical cooperation with instrument manufacturers.
7673,7683 and 6850 autosamplers Screw top 4 mL glass vials are a custom fit to the Aijiren 6850 autosampler tray for use as sample as well as wash vials. Vials with fill marks are also appropriate for use as wash vials and waste vials in 7673 and 7683 autosamplers.
Glass Vials available for HPLC and GC equipment. High Quality GC and HPLC Vials for your application can be ordered online or by phone or email. +44 (01786) 841001
Economical and convenient storage for samples of your screw cap and crimp seal vials. Can be stacked when empty or full. Autoclavable, 120° C. Each case contains 5 racks.
Polypropylene certified vials for autosampler use are translucent and chemically resistant. They are the vials of choice for pH-sensitive samples, sodium, or heavy metal analyses. Polypropylene vials come in snap, crimp, or screw styles and can contain sample volumes up to 700 µL while leaving minimum residual volumes of less than 3 µL.
2 mL Screw Top Vials & Caps Aijiren 2 mL screw top vials are constructed from from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching. The associated 9 mm screw caps and closures come with your choice of septa constructed from either PTFE silicone or natural red rubber.
Search results for 2 ml vials at Sigma-Aldrich. Certified QSertVial ™ (vial with fused-in insert) kit, screw thread, 12 x 32 mm, 0.3 mL, pkg of 100. 4 Product Results
Autosampler Vials, Caps, and Closures Thermo Scientific™ 20 mm Headspace Vials, Septum, and Caps Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish.
SureStop vials are designed as part of the Advance Vial Closure System (AVCS) and remove any subjectivity around achieving the optimal seal compression when closing a vial. Below are 2mL, 12x32mm vials in clear and amber glass with 9mm screw thread vials for use with AVCS caps to provide the ultimate in sample security
Autosampler Vials Crimpers and Decappers; Autosampler Vials, Caps, and Closures; Chromatography and Mass Spectrometry Reagents; Chromatography Columns and Cartridges; Chromatography Syringes; Chromatography Water; Gases and Gas Accessories; Paper Chromatography Products; Solid Phase Extraction Products; TLC Products
Autosampler Vials & Caps for HPLC & GC Screw Top Vials, Caps and Kits Crimp/Snap Vials, Caps and Kits SureStop Vials and AVCS Caps MS Certified and Certified Vial Kits Inert High Quality Glass Vials Headspace Vials, Caps and Kits Routine Autosampler Vials
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Water analysis
Qty/Pack: 25pcs/pack or 100pcs/pack
Dimensions: 16 x 100mm
Neck Diameter: 16mm
Volume: 12ml
Payment: T/T
MOQ: 1 pack
Dimensions: 27.5 x 57mm/27.5 x 75mm/27.5 x 95mm/27.5mm x 140mm
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Environmental analysis
Neck Diameter: 24mm
Qty/Pack: 100pcs/pack
Volume: 20-60ml
Payment: T/T
MOQ: 1 pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Dimensions: 16.6 x 60mm/18.5 x 65mm
Application: Environmental analysis
Neck Diameter: 15mm
Qty/Pack: 100pcs/pack
Volume: 8-12ml
Payment: T/T
MOQ: 1 pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Dimensions: 22.5 x 46mm/22.5 x 75mm
Application: GC system
Neck Diameter: 18mm
Qty/Pack: 100pcs/pack
Volume: 10-20ml
Payment: T/T
MOQ: 1 pack
Material: Nylon; Hydrophilic PVDF; Hydrophilic PTFE; Hydrophobic PTFE; PES; MCE; Hydrophilic PP; Cellulose Acetate(CA)
Qty/Pack: 100pcs/pack
Application: Filter
Payment: T/T
MOQ: 1 pack
