Specifically designed for the bottom draw-port needle of the Waters ACQUITY UPLC and Alliance HT HPLC Systems. This vial delivers maximum sample capacity (~1.5 mL) with minimum residual volume. The 9 mm cap makes it ideal for use with Aijiren HPLC and GC Systems. Choosing the level of certified vial should be based on the concentration of analyte.
Less Stress. More Peace of Mind. Aijiren Lab Stay Safe Caps and New Solvent Bottles. Aijiren Lab Stay Safe caps and a portfolio of solvent bottles are innovative products engineered to help improve chromatographic efficiency and ease-of-use.
crimp cap Thread design not standardized; avoid mixture of vials and caps from different sources Bonded cloures with firmly to the cap connected septa for Waters and other autosamplers with penetration problems, especially in HPLC For all autosamplers/robotic systems transporting vials by a
Waters also offers a selection of glass sample vials and plastic sample vials that fit most manufacturers’ instruments. Two of the most popular uses are as HPLC vials and GC vials. These chromatography vials can be used as sample storage vials by adding a solid caps with liner. `
HPLC & GC Certified Vial Kits (Unassembled and Assembled) Catalog: Vial Glass: Patched: Cap: Septum: Vial / Closure Catalog: Pack of: Certified Convenience Kit (Unassembled) 9mm wide opening SureStop vials with AVCS caps; CERT5000-575W: 2mL Amber: Yes: Blue: Red PTFE/White Silicone: C5000-2W C5000-54B: 100: CERT5000-576W: 2mL Amber: Yes: Blue
1.10 Use clean vials, caps, and plates a. Use Waters-brand vials; they have been certified as contaminant-free.4 Other vials may not be clean or may have caps containing adhesives that can contaminate the sample manager. b. Make sure the liner on your vial and bottle caps does not contain contaminants (check the manufacturer’s description):
There’s a Thermo Scientific vial & closure for every HPLC, GC, MS instrument, application, and budget. Screw Vials, Caps, Septa, Inserts & Kits Crimp/Snap Vials, Caps, Septa, Inserts & Kits
Search results for hplc vials at Sigma-Aldrich. Certified Snap Ring CD ™ vial kit with cap/septa, ... Vials for Waters ® 96-position carousel, 8 x 40 mm 508888 ...
Thermo Scientific Routine Vials and Caps are ideal for use in most standard HPLC and GC applications and high-throughput analyses. These quality autosampler vials and caps provide consistent results for your standard and high-throughput pharmaceutical, environmental, and food and beverage applications.
China 1.5ml Clear Glass Vials with Label and Screw Caps Glass Smaple Vials, HPLC Vials, Screw Caps manufacturer / supplier in China, offering 1.5ml Clear Glass Vials with Label and Screw Caps Including PTFE Septa Pre-Slit, Mastelf Brand 0.45um Nylon Filter, 11mm Viton Septa and so on.
media bottles to be used as an HPLC reservoir. Caps have two holes to accomodate 1/8" tubing and one hole that accepts a standard luer inner joint. Caps are made from polypropylene and the inserts are made from Tefzel. Complete cap assemblies consists of the cap, tefzel insert, (2) plugs for
2ml amber autosampler vial,12mm Diameter,32mm Height,9-425 screw top.Our vials with caps are widely used in standard HPLC and GC applications.The vials can be used on all common autosamplers due to their technical geometry, preferentially they are found on Aijiren, HTA, Shimadzu, Thermo, Varian, Waters, etc.
Waters Certified vials are tested for cleanliness by HPLC and held to tightest dimensional tolerances in the industry. This product combination pack has a PTFE septum for normal phase solvents and does not reseal after puncture.
Waters Vials elections. Waters offers a selection of pre-assembled. vials with cap and pre-slit PTFE/Silicone septum for use in the Waters Alliance HPLC Dissolution System. The vials come ready to use, freeing the resources in your lab to be more productive. Pre-assembled vial, cap and pre-slit PtFe/silicone septum, 100/pack.